Resetting Power Trip In Singapore – How to?

Resetting Power Trip In Singapore – How to?

As someone who lives in Singapore, I know how frustrating it can be to experience a power trip. A power trip is when there is an electric overload, causing the circuit breaker to trip and the power to go off. This can be a common occurrence in Singapore due to the high humidity and frequent thunderstorms.

When a power trip happens, it is important to know how to reset the circuit breaker to restore power. Most homes in Singapore have their electric supply routed through a distribution box or panel consisting of circuit breakers.

These are special switches designed to trip automatically to stop current from overflowing. However, they can also cause your light installations to lose power. In this article, I will provide a guide on how to reset a power trip in Singapore and troubleshoot common issues.

Understanding Power Trips


Always remember to pay your bills so that it wouldnt affect people around you #generalreminder #fypシ #sgtiktok #fyp

♬ Oh no, oh no, oh no, no no – Hip Hop

Causes of Power Trips

As an electrician, I have found that power trips are a common problem faced by homeowners in Singapore. A power trip occurs when the electrical circuit breaker trips and cuts off the power supply to a particular area or appliance. There are several reasons why power trips occur, including:

  • Overloading: This happens when too many appliances are connected to a single circuit, causing it to overload and trip.
  • Short circuits: This occurs when there is a fault in the wiring, causing a sudden surge of electricity and tripping the circuit breaker.
  • Power surges: This happens when there is a sudden increase in voltage, which can be caused by lightning strikes or faulty appliances.
  • Circuit breaker faults: Sometimes, the circuit breaker itself may be faulty and trip for no apparent reason.

Signs of Power Trips

It is important to recognize the signs of a power trip so that you can take appropriate action. Some common signs of a power trip include:

  • Appliances suddenly turning off
  • Lights flickering or dimming
  • Burning smells or sparks coming from electrical outlets
  • Circuit breaker tripping frequently

If you notice any of these signs, it is important to take immediate action to prevent any potential hazards. Resetting the circuit breaker may be a temporary solution, but if the problem persists, it is best to seek professional help.

Resetting A Power Trip in Singapore

Safety Precautions

Before attempting to reset a power trip, it is important to take safety precautions to avoid any accidents or injuries. Here are some safety measures to follow:

  • Turn off all electrical appliances and devices to prevent damage or injury.
  • Wear rubber-soled shoes or stand on a rubber mat to avoid electric shock.
  • Do not touch any electrical equipment or wires with wet hands or while standing in water.
  • Do not attempt to reset the power trip if you are unsure or inexperienced. Call a licensed electrician for assistance.

Steps to Reset a Power Trip

If you have taken the necessary safety precautions, you can proceed to reset the power trip. Follow these steps:

  1. Locate the circuit breaker box and identify the tripped breaker. It should be in the “off” position or in the middle.
  2. Switch the tripped breaker to the “off” position and then back to the “on” position. You should hear a click when it snaps into place.
  3. If the breaker trips again immediately, it may be due to an overload or short circuit. Unplug any appliances or devices that may be causing the issue and try again.
  4. If the breaker trips again after a few minutes or hours, it may be due to a faulty circuit or wiring. Call a licensed electrician for assistance.

Remember to always prioritize safety when dealing with electrical equipment and to seek professional help if you are unsure or inexperienced.

Preventing Power Trips

Maintenance Tips

As someone who has experienced power trips in the past, I have learned that regular maintenance of electrical systems is crucial in preventing power trips. One of the most important things to do is to check for loose connections and frayed wires. Loose connections and frayed wires can cause electrical arcing, which can lead to power trips. If you notice any loose connections or frayed wires, call an electrician to fix the problem.

Another important maintenance tip is to keep your electrical system clean. Dust and debris can accumulate in electrical panels and cause problems. Use a soft brush or vacuum cleaner to remove dust and debris from your electrical system regularly.

Upgrading Electrical Systems

If you have an old electrical system, it may be time to upgrade. Old electrical systems can be a fire hazard and can cause power trips. Upgrading your electrical system can also increase the efficiency of your electrical system, which can save you money on your electricity bill.

New ones like this will last 20 years at least

When upgrading your electrical system, it is important to hire a licensed electrician. A licensed electrician can ensure that your electrical system is installed properly and meets all safety standards.

There are several signs that indicate that you may need to upgrade your electrical system. If you notice that your lights flicker when you turn on an appliance, if you frequently experience power trips, or if you have an old electrical system, it may be time to upgrade.

Check out our latest Electrical pricing.

Leave a Reply

Your email address will not be published. Required fields are marked *